Ironworkers apprenticeship column climb ironworker mechanical and electrical magnetic brake maintenance content have? Regularly check the length of armature stroke. Because in the process of the operation of the brake, the cutting surface wear, armature stroke length will be increased. When the armature stroke length of less than normal value, must be adjusted, to restore the braking surface and the minimum clearance between the rotary table. If the armature stroke length increases to more than normal, can significantly reduce the suction. Often in the moving parts of the electromagnetic brake add lubricant. If replaced worn brake surface, should be to adjust the minimum clearance between brake surface and wheel. Check the mechanical wear of moving parts, and clear the dust on the surface of the electromagnet parts, flower hair and dirt. In order to ensure that the electromagnetic brake non-stop running, must often carries on the maintenance and maintenance. Regularly check bolt fastening degree, especially to screw down the bolt of electromagnet, electromagnet and shell bolt, magnetic yoke, electromagnet coil bolts and bolt connection.

Hope this artical is useful for you.
We are professional manufacturer of hydraulic ironworker machine. Welcome to our factory. If you are interested in our machines, just send us an email. (anson@sinokd.com; john@sinokd.com)