Sometimes the combined hydraulic ironworker machine working noise may appear when, can let a person feel very noisy, what should notice to make a hydraulic combined punching and shearing machine less noisy? .

1, make sure that the hydraulic combined punching and shearing machine is running under a normal state of technology.

2, make sure the integrity of the combined hydraulic ironworker working parts without defect. Especially the exhaust pipe installation, because many are set up on the exhaust pipe silencer, so the noise can be greatly reduced.

3, pay attention to whether parts loose, if you have parts to loosen condition, can produce vibration and noise is also increased.

4, in accordance with the requirements for combined punching and shearing machine for filling of lubricating oil, grease, etc, can effectively prevent such a movement with dry friction or half dry friction ugly noise produced due to lack of lubrication.

5, to adjust the clearance between the relative motion. At the same time, the operator assembly or adjustment is also very important.

We are professional manufacturer of hydraulic ironworker machine. Welcome to our factory. If you are interested in our machines, just send us an email. (anson@sinokd.com; john@sinokd.com)